...when I was cleaning my Remington 870 Express Combo 12 gauge shotgun yesterday and I saw that there was a small crack in the wood of the buttstock on the bottom side where it meets the back of the trigger guard. It was never there before or at least, I do not remember it. While it sure looks like it soaked up more of the stain when I refinished it years ago, I would swear it was not there until now but then the little gray cells do not have the RAM capability they once had I suppose.
The more I look at it, the more I think maybe it's been there awhile & I did not notice or forgot about it. It Still bothers the heck out of me, in as much as I am concerned it may expand and have a bad result.
I am guessing that maybe the wood treatment I used darkened it like that or maybe it was sweat from shooting it on a hot summer's day at the range last year (and man it was hot) or just whatever air and humidity to which it was exposed did so even though cased with desiccant in the case. I treat the wood regularly and never expected to it crack. Of course, that could be the result of firing it too. Many thousands of rounds have gone down its bores (has two changeable barrels), mostly 12 gauge slugs and 00 Buckshot but some bird and small game shot too.
I guess after 33 years 3 months & 15 days, anything was possible but I did not expect that. It's almost like a friend got hurt and is in need of care. It truly is virtually a friend and a long term one at that. I purchased my tried & true friend back on 11/11/1987 at Herman's Sporting Goods in Queens, NY and it definitely has been and remained among my favorites, in the top 5 if not the top 3 (maybe even number 1) over all those years. I carried it on the job on many an operation, in the field on many a hunting trip (took my first deer - an 8 point whitetail with it), my son hunted with it as well and we both used it on many a range trip including blogger-shoots in NH and West By God Virginia! Admittedly, in recent years, it has seen more of the inside of a case than it has of targets or deer downrange since the
old shoulder cannot take the beatings it once was able to withstand
with gleeful merriment but it still comes out a couple to few times a year to be shot with as much enthusiasm as ever.
Now, I am considering drilling a very small hole with a very small drill bit at the end of the crack to stop any further expansion. If anyone has had success or failure with that method of preventing a hairline crack from getting bigger, please chime in in the comments section. I may just leave it as is but really am concerned that it might continue to expand if left unchecked; so, if based on your experience, you think it best to leave it as is, please let me know likewise. The crack getting worse and possibly cause a piece of the wood to fall off would be catastrophic as far as I am concerned. So fixing it, to stop the crack in its tracks, is my thought for the moment but I do not want to make it worse while trying to do that. Any advice would be appreciated. Thanks.
Glenn B
3 comments:
Guitar Luthiers deal with this sort of thing all the time. The best products on the market to fix this are from https://gluboost.com/
I believe what the would recommend is their water-thin CA product.
ca glue is wonderful stuff but it does not deal well with impact- better is brownell’s acraglass and i have used it many times drilling small holes and injecting it in repairing L C Smiths
you can also use a dremel tool to cut out a dumbell looking recess across the crack within the inletting for the stock and also cut out additional area in the area where the metal beds on the stock - then bed the whole thing with acraglass containing fiberglass - none of this will be seen later
just leave enough of the wood so that the bedding does not change
I would do the drill trick and run it it until I couldn't live with it any more. I put the Choate pistol grip on my Wingmaster after my wood cracked. A 60 year old piece of steel with a plastic set of furniture and a re-barrel to a 20" changeable choke barrel refreshed it to modern standards.
Post a Comment